12 cores Breakout MPO to LC Fiber Patch Cord for Data Center
The MT-RJ and MPO are the MT series. Small size, Multi-channel is the most prominent feature, which greatly facilitates the high-density wiring. The MT series connectors have been widely applied to theCATV, Multimedia, Gigabit Ethernet, active device interface, data processing networks, telecommunication networks, asynchronous Transmission Mode (ATM). The MT-RJ is duplex ferrule plug-jack (RJ-45) design and the MPO can be 12 fibers, the MPO patchcord cable can be ribbon fiber or breakout fiber, also, the MTP is available; the MT series patchcord have low insertion loss and high precision guide pins exact alignment.
Features
With 12-fiber MPO/MTO connector standard
Available in OM3 and OM4
Interface polished type has PC, UPC and APC
Support use in attaching directly to 40/100G transceivers
For transition from trunk backbone assemblies to fiber rack system
Discrete connectors are heat-cured and use ceramic ferrules and sleeves
Fan-out fibers from MPO/MTP connectors into individual simplex or duplex
Customized for length, connector type, fiber count, and labeling
| MPO Connector |
StandardSM MT Ferrule |
Low LossSM MT Ferrule |
Standard
MM MT Ferrule |
Low Loss
MM MT Ferrule |
| Polish |
UPC |
APC |
UPC |
APC |
UPC |
UPC |
| Insertion Loss(dB) |
Typical |
0.5 |
0.5 |
0.3 |
0.3 |
0.5 |
0.3 |
| Maximum |
0.7 |
0.7 |
0.5 |
0.5 |
0.7 |
0.5 |
| Return Loss(dB) |
|
45 |
60 |
60 |
45 |
20 |
20 |
| Exchangeability(dB ) |
≤0.3 |
| Durability(dB) |
<0.2(500Matings,per EIA-455-21A) |
| Tensile Strength(dB) |
≤0.3(Max 66N) |
| Operating Temperature (℃) |
-20~+60 |
| Storage Temperature(℃) |
-40~+80 |
